BioConnect^®

Optimized recess contour (patent approved) 
Highest press-on power at the transitions to wetted areas prevents dirt and germs
   getting into the sealing space (see ASME-BPE, Ch. SD-3.7.2 and 3.7.6)
Defined expansion pockets excludes dangerous "escalator effect" between wetted area
   and elastomer seat (see ASME-BPE, Ch. SD-3.7.2)
Self-draining even after expansion of seal due to high temperature (see ASME-BPE,
   Ch. SD-3.7.7)
Metal-to-metal-stop avoids stress or overcompression of gaskets (O-ring) (see ASME
   BPE, Ch. SD-3.7.8)
Nominal pressure PN16 (D6 - DN100, ½“ - 4”)

Connect S^® - a unique solution without elastomer gasket

Optimal recess contour and design of the sealing metallic surface (patent approved)

Excellent cleanability

Tested by Fraunhofer-Institut for Grenzflה  chen-und Bioverfahrenstechnik

Hermetic tightness even under repeated temperature changes

Defined pre-stressing on the metallic sealing surface

No gasket - no elevator effect

Protection of the sealing contour against damage

 Axial positioning by metal-to-metal-stop

 Exact positioning by central guidance

Material grade 1.4435/316 L; other grades on request

Wetted areas with roughness Ra<0,8µm (Ra<0,5µm on demand)

Dimensions acc. ASME-BPE, DIN11866, DIN 11850,ISO 1127

 Material Test Report according EN 10204-3.1 (on requestADW2)

Approval for pressure application: issued by TUV Germany (SU ddeutschland)
    a) Nominal Pressure:
    PN 16 (DN 6 until DN 50)

    PN 10 (DN 65 until DN 100)

    PN 100 (DN 6 until DN 40, high pressure-aseptic connection)